| |
 |
MX Series Pleated Polypropylene
Membrane Filter Cartridges contains a graded density filter
media. It delivers superior flow rate and high throughput,
with submicron particulate retention and high dirt holding
capacity. Constructed of all FDA graded polypropylene
components provides board chemical compatibility in wide
range fluids and most industrial applications.
Available length : 9.75", 10", 19.5",
20", 30", 40"
Micron Rating : 0.1, 0.2, 0.45, 1, 5, and 10 micron |
|
| |
|
|
|
| |
 |
PW Series Depth Wound Filter
Cartridges are widely used for removing coarse particles
from process fluids. The media and core are made of FDA
compliant materials. The high dirt hold capacity with
its high structural strength make it suitable for sediment
removal from potable water and wide range of chemical
solutions.
Available length : 9.75", 10", 19.5",
20", 30", 40"
Micron Rating : 1, 5, 10, 25 and 50 micron
|
|
| |
|
|
|
| |
 |
CX Series Activated Carbon
Filter Cartridges are made of bonded granular activated
carbon and designed to remove chlorine, taste, odor, certain
VOC's and sediment reduction down to 10 micron. They are
constructed by FDA compliant materials and suitable for
potable water, commercial, industrial and food service
applications.
Available length : 9.75", 10", 19.5",
20", 30", 40"
Micron Rating : 10 micron
|
|
|
|
| |
 |
BM Series Polypropylene Melt
Blown Filter Cartridges are made by extruding 100% molten
polypropylene into high velocity air stream and cooled
down gradually to form a graded density. It meets NSF
requirement and most economic used in the pre-filtration
for potable water, chemicals, food, beverage and other
applications.
Available length : 9.75", 10", 19.5",
20", 30", 40"
Micron Rating : 1, 5, 10, 25, 50 and 75 micron
|
|
|
|
| |
 |
PX Series Pleated Polyester
Filter Cartridges are made of durable, reusable and cleanable
polyester. The large surface area and high porosity of
the media allows for high flow rates, long filter runs
with high dirt holding capacity and low pressure drop.
They are designed for medium fine residential, commercial
and industrial filtration application. The larger diameter
BB version can be fitted in U.S. standard Big Blue filter
housings.
Available length : 9.75", 10", 19.5",
20", 30", 40"
Micron Rating : 1, 5, 10, 30 and 50 micron
|
|
| |
|
|
|
|
|
