| |
For
softening and filtration applications. Available in sizes
5" to 24" in diameter, capacities from .17 to
16.63 cubic feet.
|
|
|
| |
Seamless, One-Piece ABS Tank Liner
|
|
| |
• |
Blow molded ABS shell promotes
superior adhesion to filament wound outer laminate. |
|
| |
• |
Smooth, fiber-free
inner surface with high chemical resistance
|
|
| |
• |
Not adversely affected by
regenerating chemicals (acid-caustic) or DI water |
|
| Strong, Filament
Wound Outer Laminate |
| • |
Continuous strands of fiberglass
reinforced with high strength epoxy resin |
| • |
Excellent impact and abrasion
resistance |
| • |
Rustproof and corrosion-resistant
|
| Precision Injection
- Molded Threads |
| • |
Accommodate all industry standard valves
and fittings |
| Dome Hole Option |
| • |
Available in 8" through
16" diameter tanks |
| • |
Injection molded ABS fitting
provides a 1" opening with full internal threads |
| • |
Fill cap features o-ring
seal with straight thread; no tapered thread binding on
the tank wall |
| |
Operating Parameters |
|
| |
• |
Maximum operating pressure:
150 PSI (10.2 BAR)
|
|
|
| |
• |
Maximum operating temperature:
120°F (49°C)
|
|
| |
Industry Approved
|
|
| |
• |
Tanks designed and tested
to meet industry standards, ensuring top field performance:
|
|
|
| |
|
– NSF®Standard
44
|
|
|
| |
|
– UDT |
|
|
| |
|
– WQA Standard S-100
|
|
|
| |
Warranty |
|
|
| |
• |
All residential and light
commercial tanks are backed by an exclusive limited manufacturer’s
warranty: |
|
|
| |
|
Sizes 5"-13":
10-year limited warranty |
|
|
| |
|
Sizes 14"-24":
5-year limited warranty |
|
|
| |
Residential/Light CommercialTank
Fittings and Accessories
|
|
| |
• |
A full line of closures,
adapters, hubs, laterals and other fittings and accessories
are available from Park International
|
|
|
| |
|
|
|
|
| |
|
 |
This tank is tested and certified by NSF
International against NSF/ANSI Standard 44 for materials
and structural integrity requirements only. |
|
|
| |
|
 |
This tank has been tested and approved in accordance
with UDT requirements. Use of the UDT mark is granted
by Poland’s Office of Technical Inspection (UDT) |
|
|
| |
|
|
|
|
