| |
For softening,
filtration and de-ionization applications. Available in
sizes 24"to 48" in diameter, capacities from
13.7 to 63.1 cubic feet. |
|
|
| |
High Grade Vinylester Tank
Liner |
|
| |
• |
Fiber-free inner surface
suitable for all standard water treatment applications,
including de-ionization. |
|
| |
• |
Offers wide chemical resistance;
not adversely affected by regenerating chemicals (acid-caustic)
or DI water
|
|
| |
|
|
| Strong, Filament Wound Outer
Laminate |
| • |
Continuous stands of fiberglass
reinforced with high strength epoxy resin |
| • |
Rustproof and corrosion-resistant |
| Precision Injection-Molded
Threaded Tank Openings |
| • |
Filament wound fiberglass
flanged top and bottom openings are also available |
| • |
Both accommodate all industry
standard valves and fittings |
| Full Coupling,
Threaded Dome and Side Hole Options |
| • |
Available in all 24"
to 48" vinylester tanks |
| • |
Dome holes offered in 1.5"
and 2" configurations |
| • |
Side holes (up to two per
tank) available in 2" and 3" diameters |
| Operating Parameters |
| • |
Maximum operating pressure:
150 PSI (10.2 BAR) |
| |
• |
Maximum operating temperature:
120°F (49°C) |
|
|
| |
Tank Connections |
|
| |
• |
The following are available
for bothsingle and double entry tanks: |
|
| |
|
– 4" - 8"
UN
|
|
|
| |
|
– 6" - 8"
UN
|
|
|
| |
|
– 4.5" Buttress |
|
|
| |
|
– 6" Flanged
|
|
|
| |
|
B, C, D dimensions for top
and/or bottom flangedopening tanks:
|
|
| |
|
– Top Flange: Increase
tank height listed by 2.5" (6.4 cm) for 24",
30", and 36" tanks, and by 3" (7.6 cm)
for 42" and 48" tanks.
|
|
| |
|
– Bottom Flange: Clearance
from the floor to tank bottom is reduced by 2.5"
(6.4 cm) for 24", 30", and 36" tanks, and
by 3" (7.6 cm) for 42" and 48" tanks.
|
|
| |
Industry Approved |
|
| |
• |
Tanks designed and tested
to meet industry standards, ensuring top field performance:
|
|
| |
|
– NSF®Standard
44 |
|
| |
|
– UDT |
|
| |
Warranty |
|
| |
|
 |
This tank is tested and certified by NSF
International against NSF/ANSI Standard 44 for materials
and structural integrity requirements only. |
|
| |
|
 |
This tank has been tested and approved in
accordance with UDT requirements. Use of the UDT mark
is granted by Poland’s Office of Technical Inspection
(UDT) |
|
| |
|
|
|
|
